A pre-demolition condition survey is a dated written and photographic record of the visible condition of agreed buildings, retained structural elements and neighbouring properties before demolition or substantial alteration works begin. The resulting schedule of condition can help establish which cracks, damaged finishes, repairs and other observable defects existed before the work affected the site.
The need for a clear baseline is particularly important in London, where demolition often takes place beside occupied homes, offices, shops, shared walls and buildings that must remain standing. Project teams may also need to retain a façade, basement wall, stair core, boundary structure or part of the original building while other elements are removed.
The key task is to document what was visible, exactly where, on what date and subject to which limitations. A condition schedule is not a demolition method statement, a structural-stability assessment, an asbestos survey or proof that later damage was caused by the works. This guide focuses on the records clients should expect and the questions they should resolve before demolition changes the baseline.
Key distinction: a pre-demolition condition survey documents the visible existing condition of defined assets. The separate engineering survey and demolition plan establish how work can be undertaken safely. A sound photographic baseline can support later comparison, but it cannot certify structural stability, determine vibration limits or establish legal liability by itself.
Jump to: What it is | When to inspect | What to record | Retained structures | Recording methods | Neighbouring properties | Legal framework | Report checklist | After demolition | FAQ
What Is a Pre-Demolition Condition Survey?
It is normally an agreed visual, non-intrusive inspection undertaken to preserve a factual record before relevant demolition, dismantling, strip-out or structural alteration. The inspection may cover the building to be partly retained, external and internal parts of adjoining buildings, boundaries, paved areas and other structures identified in the brief. The final document links descriptions of visible features and defects to dated, location-referenced photographs.
Some projects use the phrase pre-demolition survey to describe a much broader exercise assessing building structure, construction, hazardous materials or demolition planning. That ambiguity matters. The instruction should expressly say whether the required deliverable is a condition record, an engineering investigation, a refurbishment and demolition asbestos survey, or several separately scoped services.
| Survey or document | Main question | What it cannot replace |
|---|---|---|
| Photographic condition survey | What was visibly present before works? | Structural adequacy or demolition planning. |
| Structural survey / engineering assessment | What supports the building and how might alteration affect it? | Evidence of every cosmetic defect next door. |
| Refurbishment and demolition asbestos survey | Where are relevant asbestos-containing materials? | A photographic schedule of structural defects. |
| Demolition plan and risk controls | How is the work to be organised and controlled safely? | An inspection of adjoining interior finishes. |
| Movement or vibration monitoring | What changed or was measured during the works? | A complete before-works record. |
For the broader definition of a construction baseline, see Pre-Construction Condition Surveys: A Practical UK Guide. This article concentrates on the particular interfaces created by demolition, partial demolition and the retention of existing structures.
When Should the Condition Survey Be Completed?
Before the earliest work capable of altering the areas being recorded. On a demolition site, that may mean before internal strip-out, façade removal, breaking-out, separation from adjacent buildings or installation of temporary works. Waiting until the large demolition machines arrive may be too late if the original building fabric or neighbouring finishes have already been disturbed.
A project may need more than one record. For example, a before-strip-out survey can establish the initial state of a retained wing; a supplementary survey after soft strip may establish the condition immediately before structural demolition; and a later record can document the retained structure before a new contractor takes over. Each phase must have its own actual inspection date and clear scope.
| Project milestone | Condition-recording consideration |
|---|---|
| Before enabling or strip-out | Record the agreed baseline before disturbance. |
| Before structural separation | Capture shared interfaces and retained elements. |
| After a significant change in scope | Review whether a supplementary survey is needed. |
| Before contractor handover | Record condition and responsibility boundaries. |
| After relevant demolition works | Compare the same features where appropriate. |
What if the demolition programme is delayed?
There is no universal period after which a photographic condition record becomes invalid. The original remains evidence of the condition on its date. However, a long delay, water ingress, occupation changes, intervening works or deterioration may mean it no longer shows the condition just before the relevant activity. A supplementary record should be considered where that gap matters.
Timing rule: label the record according to the construction phase actually observed. A schedule completed before strip-out should not later be relabelled as an immediate pre-demolition survey if substantial intervening works have changed the structure or its finishes.
What Buildings, Structures and Defects Should Be Recorded?
The brief should identify specific property addresses, elevations, rooms, shared boundaries and retained elements rather than asking for unspecified “full photographic coverage”. It should be developed with the demolition scope and appropriate structural information so that the areas most relevant to the proposed works are not inadvertently omitted.
For an urban demolition site, candidates may include adjoining masonry elevations, party-wall interfaces, shared chimney structures, exposed parapets, retained façades, basements, boundary and retaining walls, nearby hardstanding, occupied interior finishes and the parts of the original building that will remain. The precise extent depends on the construction interface, project risk and lawful access.
| Area or asset | Visible condition to consider | Typical limitation |
|---|---|---|
| Adjoining masonry | Existing cracks, open joints, previous repairs. | Some faces inaccessible. |
| Retained façade or frame | Spalling, cracking, damage, visible connections. | Does not verify hidden stability. |
| Shared walls and junctions | Distortion, separation, changes in finishes. | Ownership and access may differ. |
| Basements and cellars | Visible cracking, stains and previous repairs. | Concealed foundations not assessed. |
| Boundary and retaining walls | Leaning, fractures, displaced units. | Vegetation or access obstructions. |
| Occupied adjoining rooms | Plaster cracks, ceilings, openings and finishes. | Owner or occupier permission needed. |
| Paving and external features | Existing settlement, damage, open joints. | Features below the surface unseen. |
An older brick terrace and a modern framed office building can have different vulnerabilities. A pre-demolition survey scope should therefore reflect the retained and adjoining construction, the intended demolition interface and relevant technical advice, not just the distance between two addresses.
Should only the building directly next door be surveyed?
Not necessarily. Adjacent premises are usually the first consideration, but the scope may extend to other buildings or structures where the demolition method, site layout or assessed effects warrant it. Conversely, a small isolated structure may call for a narrower record. The selection of potentially affected buildings is a project-specific risk decision and should not be inferred from a universal radius.
Retained Façades, Party Walls and Structural Interfaces
Partial demolition is different from clearing an independent structure. The remaining building may have relied on floors, walls, frames or other elements scheduled for removal. Identifying those support relationships belongs to competent structural assessment and temporary works design, not to a photographic condition survey.
The HSE explains that a competent person should survey and assess the structure before potentially load-bearing elements are altered. It also warns that standard scaffolding does not, simply by being present, restrain a building during demolition. These are critical design and safety matters. A condition record can document visible conditions but cannot demonstrate that a retained façade or adjoining wall has adequate support.
For a retained masonry façade, a useful baseline might document visible open joints, existing spalled bricks, displaced copings, previous repairs and cracking at window openings. For a retained concrete frame, it may record obvious spalling, staining, visible cracking and existing surface repairs. The findings should be described objectively, without treating them as a structural-capacity assessment.
Why are party-wall and separating-wall junctions important?
Work beside an adjoining building may disturb existing wall interfaces, finishes or weatherproofing. A condition record can establish what was already visible at those interfaces. However, whether the work falls within the Party Wall etc. Act 1996 is a separate legal question, as are arrangements for structural support and protection. The survey must not be presented as a Party Wall Award or as permission to undertake notifiable work.
Retained structures and handover between contractors
Where demolition, enabling works and new construction are performed under separate contracts, it can be difficult later to establish which phase altered a retained element. Project records should identify the date, inspection scope and construction stage. A later post-demolition baseline may be valuable before intrusive strengthening, excavation or new foundations begin, but it should not overwrite the original pre-demolition record.
How Should Pre-Demolition Defects and Photographs Be Recorded?
A useful schedule is systematic and repeatable. Each inspection should identify the property, inspection date, safe access locations and specific areas inspected. Within those areas, descriptions should follow a consistent elevation-by-elevation or room-by-room order. Photographs need unique identifiers that can be located on plans or in a room register.
Record what can be seen, not what is merely suspected
Useful observations include masonry cracks, open joints, displaced render, spalling, staining, previous filling, repairs, separation at wall-to-ceiling junctions, distortion around openings and visible deterioration to boundary structures. A defect should not be described as active, caused by vibration or structurally significant solely because it is visible.
Illustrative schedule entry: “Adjoining property C, rear elevation E1, second-floor window reveal: stepped mortar-joint crack extending approximately 480 mm from the upper corner; maximum visible opening approximately 0.5 mm at marked point; overview image C-E1-016 and close-up C-E1-017 with scale. Historic repointing visible locally.” This is an example of reporting format, not a finding from an actual property.
Where crack width is within the brief, the measurement point and method should be documented. The technical significance of a crack depends on more than its width. BRE guidance on assessing cracks provides context, but a photographic schedule is not a diagnosis of movement or damage causation.
Overview, detail and repeatable viewpoint
- Overview: show the entire wall, elevation or room to establish the location.
- Detail: capture the defect with a visible scale where practicable.
- Reference: link each image to a room, elevation or marked plan.
- Date: identify the real inspection date and report issue date.
- Original files: preserve originals and record subsequent edits or report revisions.
- Exclusions: list locked rooms, unsafe areas, concealed surfaces and inaccessible elevations.
- Repeatability: give a future reviewer enough information to revisit the same feature.
High image counts are not a substitute for traceability. A smaller set of clear, referenced views will generally be easier to compare than many unlabelled photographs. Video walkthroughs may supplement a schedule but do not automatically replace the need for indexed images, written observations and a defined scope.
Neighbouring Property Access, Occupiers and Existing Defects
Adjoining owners and occupiers may be concerned about vibration, damage to decorations, water penetration, dust, noise or the stability of a shared wall. A neighbouring-property condition survey can provide a fair reference for both sides, but the request for access should be clear about which rooms or external areas will be inspected, the inspection purpose, who will receive the report and how photographs will be handled.
A developer may commission an external baseline, while an interior inspection may depend on the consent of occupants and any applicable statutory access arrangements. Where access is refused or restricted, the record should state that fact and describe exactly what remained uninspected. A photograph taken from the street cannot verify the condition of an occupied room.
For practical detail on the adjoining owner’s perspective, see Neighbouring Property Condition Surveys Before Building Work. That guide addresses occupier questions, access, limitations and use of before-and-after evidence.
Protecting private information in survey images
Photographs inside occupied premises may include people, correspondence, identification documents, security systems or personal possessions. Inspection and record-management arrangements should minimise unnecessary capture, restrict circulation to the appropriate parties and use proportionate retention and security measures. A private condition report should not be repurposed as public promotional photography without appropriate permission.
Demolition Regulations, Party Wall Procedures and Other Surveys
Legal obligations are not interchangeable. A photographic condition schedule may be useful or required by a particular project agreement, but it does not replace demolition planning, statutory notices, professional assessments or hazardous-materials surveys. The following legal context primarily concerns England and Wales; Scotland and Northern Ireland have different arrangements in some areas.
CDM 2015 and competent demolition planning
The Construction (Design and Management) Regulations 2015, Regulation 20 require demolition or dismantling to be planned and carried out to prevent danger, or to reduce it so far as reasonably practicable where prevention is not practicable. The HSE demolition guidance addresses pre-construction information, assessment of structural form, neighbouring risks and competent planning. A condition record may be one supporting information source, but is not the required demolition engineering work.
Building Act 1984: demolition notices
For many relevant demolition works in England and Wales, section 80 of the Building Act 1984 establishes notice requirements to the local authority, subject to the section’s scope and exceptions. Local authority requirements may be relevant to adjoining buildings and the protection of public areas. Whether notice is needed must be checked for the specific project; the existence of a photographic condition survey does not fulfil the statutory notice process.
Party Wall etc. Act 1996
In England and Wales, works affecting certain party walls or structures, or qualifying excavation close to neighbouring buildings, may require procedures under the Party Wall etc. Act 1996. The Government’s explanatory booklet explains that a schedule of condition is prudent but is not itself a requirement of the Act. A schedule may accompany an award, but it is not a notice, agreement or award.
A demolition project may involve partial removal of fabric adjoining a party structure, but not every demolition automatically triggers the same procedure. The proposed work and legal boundary conditions need project-specific assessment by appropriately competent professionals.
Asbestos and demolition surveys are different
A refurbishment and demolition asbestos survey is not the same as a photographic condition survey. HSE guidance explains the need for appropriate information on asbestos-containing materials before relevant refurbishment and demolition. Such work requires suitably competent asbestos specialists and arrangements for managing identified materials. Taking general condition photographs does not establish that a building has been assessed for asbestos.
The HSE asbestos survey guidance and HSG264: Asbestos – The survey guide explain the specialist survey context. Likewise, heritage constraints, planning controls and any local authority conditions require separate project-specific checks.
Professional guidance: BS 6187:2011
BS 6187:2011, Code of practice for full and partial demolition, provides recommendations for the management and planning of demolition, including structural stability and appropriate temporary support. It is not a universal format specification for pre-demolition photographic schedules and should not be cited as though compliance with it certifies a condition survey.
What Evidence Is Needed During and After Demolition?
A condition schedule captures the condition at defined dates. Vibration measurement, movement monitoring, visual inspections during works and engineering assessments address different questions. A project may require one or several forms of evidence depending on the planned demolition technique, structural sensitivity and risks to neighbours.
| Evidence or control | What it addresses | Limit |
|---|---|---|
| Condition schedule | Visible defects on a defined date. | Not continuous measurement. |
| Vibration monitoring | Measured vibration at selected positions. | Not a complete defect record. |
| Movement / settlement monitoring | Changes at instrumented locations. | Cannot cover every part of a building. |
| Structural inspection / engineering review | Stability and identified engineering concerns. | Depends on a competent defined scope. |
| Demolition plan / temporary works | Risk controls and structural support. | Not evidence of all pre-existing defects. |
The strongest record systems use consistent building and location identifiers across these sources. If a façade crack is photographed in the baseline and a monitoring point is installed nearby, both should be traceable to the same elevation and relevant construction stage. That makes later review more coherent without implying that every measured change was caused by demolition.
Avoid an automatic causation claim: if a crack looks different after demolition, the before-and-after photographs may support that observation. They do not, alone, prove that demolition caused the change. Structural behaviour, previous defects, environmental conditions, vibration, impact and other evidence may all need consideration.
What Should a Pre-Demolition Condition Survey Report Include?
The essential quality question is whether a person who did not attend the inspection can understand which structure was observed, what conditions were recorded and how reliable the comparison would be. Clients should expect a clear brief, sufficiently specific descriptions, referenced images, unambiguous limitations and document control.
| Report section | What the client should find |
|---|---|
| Purpose and demolition stage | Reason for survey and planned works. |
| Properties and boundaries | Addresses, plans, rooms and elevations. |
| Inspection record | Date, inspector and relevant access details. |
| Survey method | Visual scope and measurements included. |
| Condition observations | Location-specific existing defects. |
| Photo register | Unique IDs and related written entries. |
| Retained elements | Defined façades, frames, walls and interfaces. |
| Excluded areas | Locked, concealed, unsafe or unseen locations. |
| Document control | Issue, revisions and record recipients. |
| Follow-up arrangements | Who reviews later observations and when. |
The report should distinguish visible defects from opinions on their causes. If no internal access was obtained, it must not imply that interior finishes, structural connections or concealed foundations were inspected. If a structural risk is identified, that should be referred for competent assessment rather than resolved through an unsupported photographic conclusion.
Client Checklist Before Demolition Begins
Use these briefing questions when discussing a pre-demolition condition record. They are practical prompts, not a prescribed statutory form and not a replacement for the separate demolition safety plan.
- Purpose: Is the instruction a factual condition schedule, a structural investigation or both?
- Programme: Have strip-out or other potentially disruptive activities already started?
- Interfaces: Which buildings, walls and retained elements may be affected?
- Structural information: Has a competent designer identified the significant retained support relationships?
- Neighbours: Have affected property owners and occupiers been contacted appropriately?
- Access: Which rooms, elevations, basements and boundaries can lawfully and safely be inspected?
- Defects: Will cracking, repairs, staining and visible distortion be referenced?
- Photographs: Are overview and detailed images labelled and repeatable?
- Dates: Is the inspection clearly tied to the actual construction stage?
- Specialist surveys: Have separate structural and asbestos requirements been addressed?
- Legal checks: Are relevant building-control, party-wall and planning matters being handled separately?
- Handover: Who retains original files and shares controlled copies with the right project team?
- After works: What prompts a post-demolition review or supplementary condition record?
How Should Condition Be Compared After Demolition?
When demolition ends or a concern is reported, the original schedule can be used as a reference for a targeted reinspection. Compare the same wall, opening, boundary or retained element with the earlier descriptions and images. Record any new observations, changed measurements and differences in access. Where the earlier scope was incomplete, note that limitation rather than assuming an unseen defect was absent.
For example, a neighbour may report fresh plaster cracking after partial demolition. If the original photographs show a small crack in the same location, the comparison may support a finding of visible change rather than entirely new damage. Whether the change is attributable to demolition, age-related behaviour, thermal effects, water ingress or another mechanism requires appropriate assessment and evidence.
A later inspection can also create a new baseline for the next phase of works, such as excavation or new foundations. The original report should be retained as a separate historical record. For the distinct issues arising during foundation operations, see Condition Surveys Before Piling and Excavation: A UK Guide.
Common Mistakes That Weaken Pre-Demolition Records
| Common mistake | Better approach |
|---|---|
| Photos taken only after strip-out. | Record before the first relevant activity. |
| No defined retained-building scope. | Identify interfaces and excluded areas. |
| Treating a condition record as structural approval. | Obtain separate engineering assessment. |
| Unlabelled images of cracks. | Use locations, references and scales. |
| Assuming ordinary scaffolding provides restraint. | Refer stability to competent designers. |
| No record of refused access. | State exactly what was not inspected. |
| Combining several phases under one date. | Issue distinct records or supplements. |
| Assuming visible change proves liability. | Separate observation from causation. |
| Confusing condition and asbestos surveys. | Commission appropriate separate scopes. |
Evidence-Based Summary
A pre-demolition condition survey is a dated factual baseline of agreed visible building conditions before potentially disruptive demolition or alteration work.
The scope should focus on relevant adjoining properties, shared interfaces, retained structures, boundaries and accessible interior areas.
The survey must be clearly distinguished from the engineering assessment, asbestos survey, demolition planning and temporary works controls required for different purposes.
Photographic traceability, known inspection limitations and accurate phase dates are essential to meaningful later comparisons.
Condition records can help document differences after works; they do not independently determine the cause of defects or legal responsibility.
FAQ: Pre-Demolition Condition Surveys
What is a pre-demolition condition survey?
It is a dated visual and photographic record of agreed buildings or structures before demolition or major alteration. It documents visible defects and limitations for potential later comparison; it does not plan the demolition or certify stability.
Is a photographic condition survey legally required before every demolition?
No single general rule makes an independent photographic schedule mandatory for every demolition. Particular contracts, planning requirements, agreements or awards may require one. Separate statutory duties for demolition planning and safety still apply.
Does a pre-demolition condition survey replace a structural survey?
No. The factual schedule describes accessible visible conditions. Structural assessment addresses load paths, stability, retained elements and other defined engineering questions, and must be undertaken by competent professionals when required.
When should neighbouring buildings be photographed?
Before the earliest demolition, strip-out, breaking-out or alteration activity that could change the recorded areas. A later supplementary record may be appropriate if the work proceeds in stages.
Should the survey include inside the neighbour’s building?
That depends on the agreed brief, potential effects and lawful access. Interior rooms can provide important evidence of existing finishes and cracks, but areas without access must be identified as uninspected.
What if a retained façade or wall has existing cracks?
Document the visible crack pattern, location, scale and previous repairs within the brief. Any question about its structural stability, restraint or future loading requires a separate competent engineering assessment.
Is an asbestos demolition survey the same document?
No. An asbestos refurbishment and demolition survey is a specialist process to identify relevant asbestos-containing materials. A photographic condition schedule cannot substitute for it.
Does the Party Wall Act always apply to demolition?
Not automatically. Some work to party structures or associated excavations may fall within the Party Wall etc. Act 1996 in England and Wales. Applicability depends on the exact proposals and should be checked separately.
Can photographs prove that demolition caused a new crack?
Not on their own. They may show a before-and-after difference at a recorded location. Attribution of cause can require engineering assessment, construction records, monitoring and other evidence.
Should there be another survey after demolition?
A comparable post-works inspection may be useful where the scope, contract, complaints or project risk justify it. For phased works, the resulting document may also become a new baseline for the next construction activity.
Sources and Technical Reference Context
- HSE – Demolition. Client information, competent planning, nearby structures and method considerations.
- HSE – Structural Stability During Alteration, Demolition and Dismantling. Competent structural assessment and temporary support context.
- The Construction (Design and Management) Regulations 2015 – Regulation 20. Legal duties for demolition and dismantling.
- Building Act 1984 – Section 80. Demolition notice framework in England and Wales, subject to exceptions.
- GOV.UK – Party Wall etc. Act 1996 Explanatory Booklet. Statutory procedures and status of condition schedules.
- HSE – Asbestos Surveys and HSG264: Asbestos – The Survey Guide. Separate asbestos survey requirements.
- BSI – BS 6187:2011, Code of Practice for Full and Partial Demolition. Demolition planning and management context, not a photographic schedule specification.
- BRE – Assessing Cracks in Houses. Guidance context for visible defects and limitations of interpretation.
Related STRUCTinspect Guidance
For general survey principles and reporting boundaries, read Pre-Construction Condition Surveys: A Practical UK Guide. To understand adjoining property access and existing damage records, see Neighbouring Property Condition Surveys Before Building Work. Where the next phase involves foundations, review Condition Surveys Before Piling and Excavation: A UK Guide. For the distinction between observation and engineering interpretation, see How Structural Investigations Are Planned.
Source Context and Editorial Note
This STRUCTinspect UK technical guide explains the purpose, scope, timing and limitations of condition records before demolition and structural alterations. Its illustrative defect entry is not an observation from a real project. The original editorial photograph shows a concrete structural frame beside existing London buildings; it is not represented as an image of an active demolition operation.
This article is independent technical information and does not claim that STRUCTinspect UK currently offers condition survey, demolition, engineering or party wall services. It is not a site-specific structural assessment, approved demolition plan, asbestos survey, Party Wall Award, legal opinion or finding about damage causation.
Where demolition could affect structural stability, adjoining owners, public safety or concealed materials, appropriate specialists and dutyholders must establish the relevant statutory requirements and project-specific risk controls.